PRODUCT SPECIFICATIONS
***Take Note: Gel balls included with Blasters are generally of low quality and can often cause feeding issues hence we highly recommend purchasing our high quality Hardened Gel Balls for the best performance***
PERFORMANCE
Approx 15-25M shooting distance
Up to 260 FPS
UPDATED VERSION/Metal gear/Metal cylinder/Metal nozzle/Metal rubber stud/Upgrade spring/Upgrade motor/Metal tube/HOP UP/11.1 battery + charger/Milky white gel ball
MOSFET UPGRADE VERSION
On The Basis Of The Upgraded Version, Add A Mosfet. And Install Shs Metal Gear And Ndfeb Motor
1 Add The Function Of Feeding In Advance
2add Binary Trigger Mode
3 Better Battery Protection
3 Increase The Function Of Three Bursts And Five Bursts
4 Make The Output Of The Gel Ball More Stable
INTRODUCTION MOSFET
Mode Control
A. Single Shot Mode
B. Auto Mode
C. Safe Mode
CAUTION
-Recommended for ages 14 and above
-Charge the battery for at least 4 hours
-Soak your gel balls for 1.5 hours or more for maximum hydration
-Don’t fire at people or animals
-Please wear safety protective google when using
-After shooting, remove the battery to save power and leak the battery.
-Please do not modify it as we do not cover configuration of the default set.
** Colors may look differently on individual monitor due to the color setting and lighting etc.**
SOAKING GEL BALL PROCESS
GEL BALL / WATER RATIO
10,000 / 4L Water
5,000 / 2L Water
500 / 300ml Water
METHOD
Step 1: Empty the gel ball pack into bucket
Step 2: Fill bucket with water (the more the better)
Step 3: Allow gel ball to soak for 1.5 hours minimum! (overnight recommended!!)
Your gel balls are now ready to use.
Storage: Up to 2 weeks in an airtight container away from sunlight. For best results , store in water and strain when needed.